Offset uPVC Window Espag Lock Mechanism  - DéDannan Window and Door Parts Ireland

D'Best Door and Window Parts Online 24/7

Offset uPVC Window Espag Lock Mechanism 

9.7525.00

Clear

Window Lock Mechanism offset Espag Upvc. 250mm 400mm 600mm 800mm 1000mm.

Replacement window espag mechanism for most PVC windows including Munster Joinery lock repairs.

This espag comes in 22mm backset as standard, if you require a 20mm or 25mm backset please contact us HERE and we can order them for you

 

Mechanism Length

250mm, 400mm, 600mm, 800mm, 1000mm, 1200mm

Backset

20mm, 22mm, 25mm

Offset uPVC Window Espag Lock Mechanism

250mm 400mm 600mm 800mm 1000mm 1200mm

An offset window lock locking mechanism is just that, the gearbox at the back of the mechanism is to one side or along the edge of the backplate and no in the middle (like the inline).  An espag is a rod that goes into the euro groove in PVC windows, sometimes called a locking rod or locking track.

A standard offset U Rail espag locking mechanism. An espagnolette multipoint UPVC window lock is the gearing part inside a window that a spindle drive handle operates. This offset mushroom bolt espagnolette is designed for profiles with or without a euro groove and can be used on Aluminium, Timber, and UPVC window systems.  These mechanisms can be fitted to side or top hung windows.

Specifications

    • 16mm faceplate
    • 20mm/22mm/25mm backset
    • 7mm spindle
    • 8mm mushroom cam height
Important: Offset mechanisms coming out of old PVC windows, say old Munster joinery windows will not be the same as the new ones, we can still get these by special order if you would like, so please use the contact us button if you require them ordered, but the new ones will fit with a little maneuvering and patience. If you need any advice please contact us. We usually recommend emailing us an image of your old lock if you are not sure. Please Note:  The locking mechanism we supply may slightly differ from the image shown here.

Please check your replacement window locks ‘Backset’, this is the distance from the front of the lock to the center of the spindle as shown here.  This is to ensure your new window lock will fit into the position of the old one, however, if you cannot get the exact match it is possible to open up the hole on the frame by 1-2mm with a drill.  It is also advisable to ensure you order the right length window espag for your window. This window locking mechanism is also suitable for most PVC windows, it is also suitable for Munster Joinery Window Repairs.  Do you need mechanism keeps or receivers?  You can choose from our window lock receivers here.

Click HERE for the returns form.  This MUST be filled out and all returns must come with these returns for, otherwise, we cannot accept them,

If you have queries on any of our products or if the part you require is not on our site please use our CONTACT FORM to send us a picture or part number of the part you need, we will get back to you and get you sorted ASAP.

Other Things You May Need – Siegenia Offset window receivers keeps:

Si Siegenia striker plate 0608 receiver keep plate for upvc windows or doorsSI Siegenia Window Striker Keep 0920. Also Door Roller Cam Lock Cam Flat Universal Fit. This is a Siegenia roller cam striker keep is used as replacement broken striker keeps and can be used on most types of Upvc windows or doors with only a little adaption to create a suitable fixing point.SIEGENIA-Upvc Door Roller Keep Strike Plate receiver 0720

 

Mechanism Length

250mm, 400mm, 600mm, 800mm, 1000mm, 1200mm

Backset

20mm, 22mm, 25mm

1 review for Offset uPVC Window Espag Lock Mechanism 

5.0
Based on 1 review
5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Brendan Murphy (verified owner)

    Excellent service, parts correct and received within specified time

Add a review

You may also like…

(1 customer review)